Premium Semi-Synthetics

 

      Premium Semi-Synthetics

 

  • XTREME CUT 291: is a high performance semi-synthetic fluid designed for extremely difficult machining applications. The product is particularly well suited for difficult aerospace alloys such as Inconel, Titanium, and Stainless Steels. The product is formulated for use on both ferrous and non-ferrous metals where a high level of boundary and extreme pressure lubrication are required. XTREME CUT 291 provides the performance level of heavy-duty soluble oils without the unpleasant odors or high usage rates associated with soluble oils. This unique product combines new proprietary lubricant additives to give the best surface finishes and tool life of any water based metalworking fluid on the market. Due to the amount of lubricity, XTREME CUT 291 has been able to replace straight oils where other water dilutable products have failed. XTREME CUT 291 has excellent bio-resistance resulting in long fluid life in both central systems and individual sumps. The product also exhibits a tight, stable emulsion that imparts excellent tramp oil rejection and product stability. Translucent-milky in appearance. Request Quote / Request Trial Product
  • XTREME CUT 290: is a high performance semi-synthetic fluid designed for the most difficult machining applications. The product is formulated to improve tool life on difficult aerospace alloys such as Inconel, Titanium, and Stainless Steel. XTREME CUT 290 provides the performance level of heavy-duty soluble oils without the unpleasant odors or high usage rates associated with soluble oils. This unique product does not contain chlorine, phosphorous, or sulfur; yet its performance exceeds soluble oils, which contain these extreme pressure additives. XTREME CUT 290 has excellent bioresistance resulting in long fluid life in both central systems and individual sumps. It has a tight, stable emulsion that imparts excellent tramp oil rejection and product stability. Semi translucent -milky in appearance. Request Quote / Request Trial Product
  • XTREME CUT 250C: is a premium, heavy-duty semi-synthetic fluid designed to provide optimum tool life and surface finish. This product is formulated for use on a wide range of ferrous and non-ferrous metals, which makes it well suited for job shop operations. XTREME CUT 250C also has excellent corrosion control for ferrous metals. The fluid has a tight emulsion to promote tramp oil rejection and exhibits excellent hard water stability. XTREME CUT 250C utilizes state of the art raw materials to prevent the rotten egg odors associated with most soluble oils and semi-synthetic fluids, runs clean, has excellent bio-resistance, and is low foaming.
    XTREME CUT 250C is approved under Boeing’s BAC 5008 specification, PSD 6-128Milky in appearance. Request Quote / Request Trial Product
  • XTREME CUT 251C: is a premium, high performance semi-synthetic fluid designed to provide optimum tool life and surface finish. The product is designed for cutting and grinding a wide range of ferrous and non-ferrous alloys, which makes it well suited for job shop operations. XTREME CUT 251C contains an extreme pressure additive and high performance additives to further improve tool life and part quality. The product provides excellent corrosion control for ferrous metals, has a tight emulsion to promote tramp oil rejection, exhibits excellent hard water stability up to 35 grains of hardness, runs clean, has excellent bioresistance, and is non-foaming. Additionally, XTREME CUT 251C utilizes state of the art raw materials to prevent the rotten egg odors associated with most soluble oils and semi-synthetic fluids. Milky in appearance. Request Quote / Request Trial Product
  • XTREME CUT 241: is a chlorinated, heavy duty, semi-synthetic cutting and grinding fluid designed for ferrous metals. The product is effective in both critical grinding operations as well as difficult machining applications. XTREME CUT 241 is well suited for both individual sumps and central systems and can reduce the number of fluids due to its ability to handle a wide range of operations. This unique product employs state of the art raw materials to prevent the rotten egg odors associated with most soluble oils and semi-synthetic fluids and is extremely mild to the skin. XTREME CUT 241 is a new generation of metalworking technology designed to provide optimum operator acceptance.. Request Quote / Request Trial Product
  • XTREME CUT 232: is designed to excel on ferrous materials while also being multi-metal safe. This fluid is ideal to use when a mix of metals are being machined or ground and where the primary metals consist of steels and stainless alloys, including heat-treated stainless steels. XTREME CUT 232 offers a level of point-of-cut performance on ferrous alloys previously only possible with high-lube full synthetic fluids and extreme pressure containing soluble oils, but with the machine compatibility, operator friendliness and rust protection of today’s premium low oil emulsion products. This is made possible by selecting raw materials specifically designed to lubricate and provide extreme pressure performance on ferrous metals. The fluid has the additional benefit of unique surfactant chemistry for extremely low drag-out rates, thus reducing usage and maintenance burden. XTREME CUT 232 will run clean, has excellent resistance to biological contamination and is low foaming. Clear in appearance. Request Quote / Request Trial Product
  • XTREME CUT 230: is a premium semi-synthetic fluid for machining and grinding ferrous and non-ferrous alloys. This universal fluid delivers the lubricity and versatility of a premium soluble oil, yet has the cleanliness and heat control of a synthetic. XTREME CUT 230 is designed for use on a wide range of metals, making it well suited for job shop operations. The product’s new generation of additive technology improves tool life and part quality without the problems associated with extreme pressure additives such as chlorine, sulfur, and phosphorous. XTREME CUT 230 also has excellent corrosion control for ferrous metals, a tight emulsion to promote tramp oil rejection, and exhibits excellent hard water stability up to 35 grains of hardness. XTREME CUT 230 utilizes state of the art raw materials to prevent the rotten egg odors associated with most soluble oils and semi-synthetic fluids. The fluid runs clean, has excellent bio-resistance, and is low foaming. Translucent blue in appearance. Request Quote / Request Trial Product
  • XTREME CUT 231: is a premium semi-synthetic fluid for machining and grinding ferrous and non-ferrous alloys. This universal fluid delivers the lubricity and versatility of a premium soluble oil, yet has the cleanliness and heat control of a synthetic. XTREME CUT 231 is designed for use on a wide range of metals, making it well suited for job shop operations. The product contains an extreme pressure additive as well as other high performance additives to improve tool life and part quality. XTREME CUT 231 also has excellent corrosion control for ferrous metals. The fluid has a tight emulsion to promote tramp oil rejection and exhibits excellent hard water stability up to 35 grains of hardness. XTREME CUT 231 utilizes state of the art raw materials to prevent the rotten egg odors associated with most soluble oils and semi-synthetic fluids. The fluid runs clean, has excellent bioresistance, and is low foaming..  Translucent blue in appearance. Request Quote / Request Trial Product
  • XTREME CUT 220C: is a chlorine free, moderate duty, semi-synthetic cutting and grinding fluid for ferrous metals. The product is designed for use in central systems. XTREME CUT 220C is specifically formulated to provide cost savings by extending central system life and reducing concentrate and additive requirements. This product utilizes the latest metalworking technology resulting in the best ferrous corrosion protection available on the market today. Typical operations include boring, cylindrical grinding, internal grinding, tapping, centerless grinding, drilling, and reaming. The fluid has a tight emulsion to promote tramp oil rejection and exhibits excellent hard water stability up to 35 grains of hardness. This unique product employs state of the art raw materials to prevent the rotten egg odors associated with most soluble oils and semi-synthetic fluids. Translucent in appearance. Request Quote / Request Trial Product
  • XTREME CUT 210: is a light duty, semi-synthetic cutting and grinding fluid for ferrous applications. The product is designed for use in central systems as well as individual sumps. XTREME CUT 210 is particularly well suited for bearing grinding and in applications where oil absorbing synthetics have been used. Typical operations include boring, cylindrical grinding, internal grinding, tapping, centerless grinding, drilling, and reaming. This fluid is also well suited for customers who enjoy the benefits of a full oil rejecting synthetic, but require some oil in the product. XTREME CUT 210 is specifically formulated to provide cost savings by extending fluid life and reducing concentrate and additive requirements. The fluid has a tight emulsion to promote tramp oil rejection and exhibits excellent hard water stability up to 35 grains of hardness. This unique product employs state of the art raw materials to prevent the rotten egg odors associated with most soluble oils and semi-synthetic fluids. The fluid runs clean and has excellent bio-resistance without the use of conventional biocides.. Translucent in appearance. Request Quote / Request Trial Product

 

 

 

 

Belco Services Group / Belco Enterprises, LLC an authorized King Industrial, Inc distributor
Direct: 770.827.4332, Belco Service Region: AL, FL, GA, NC, SC, TN
 
<